TRAMEX Moisture Meters & Kits

Water Damage Master Kit

Water Damage Master Kit - WDMK5.2

The ultimate Tramex kit for finding and measuring moisture in concrete, wood and wood by-products, giving comparative readings in most other building materials

A heavy-duty pin-probe measures moisture content in wood, and gives in-depth Wood Moisture Equivalent WME readings of the moisture condition of walls and roofing insulation when using the 180mm insulated pins.

The 330mm Hygro-i@ probe gives in-depth relative humidity readings

Using the CMEX II and Hygro-i2 ® probes the user can test relative humidity, temperature, dew point and mixing ratio in the environment

  • Features

    Measures up to 6.9% Moisture Content in Concrete.

    Carbide Method (CM) equivalent scale for concrete and anhydrite.

    Hold function “freezes” meter reading when inspecting areas where the meter face is not visible.

    Attaches to a relative humidity Hygro-i2 ® probe for in situ testing of concrete and ambient conditions of relative humidity, temperature, dew point and mixing ratio, all shown simultaneously on one clear display.

    Attaches to Pin-type probe to give 7% to 24.9% Moisture Content measurement in wood and 7 - 100 WME readings in most other building materials.

    Features of MEP:

    Wide range of moisture content readings for wood from 5% to 30%.

    Deep signal penetration, up to 30mm (1.25") in wood and drywall, detects elevated moisture through most covering materials without having to damage or puncture the materials being tested.

    Three ranges of sensitivity: Wood & Timber / Drywall & Roofing / Plaster & Brick – making it ideal for testing various building materials.

  • Specification

    Size: 30mm x 345mm x 130mm (16.9" x 13.6" x 5.1")

    Weight: 3.5kg (7.7lbs)

    Power: 3 x 9 volt PP3 Batteries

    Measuring range CMEX II:

    Depth of penetration in concrete: (NDT*) approx. 3/4" (20 mm)

    Moisture content for Concrete: (NDT*) 0 to 6.9%

    Carbide Method Equivalent for concrete (NDT*) 0 to 4.3

    Carbide Method Equivalent for Anhydrite screeds: (NDT*) 0 to 2.7

    Reference scale: (NDT*) 0 to 100

    Moisture Content in wood / WME using Pin Probe: 7 to 24.9 % / 7 - 100 WME

    Relative Humidity (with Hygro-i2 ® probe): 0 to 99%

    Humidity accuracy: 0% to 99%RH +/- 2% @ 25°C / 77°F

    Measuring range MEP:

    Depth of penetration: (NDT*) 30mm (1 1/4")

    Moisture content for Wood: (NDT*) 5 to 30 %

    Reference scale for building materials: 0 to 100