TRAMEX Moisture Meters & Kits

Roof Inspection Kit

Roof Inspection Kit - RIK5.1

The Roof Inspection Kit allows for point-of-contact, non-destructive checking of moisture conditions in roofing and waterproofing systems, per ASTM D7954, up to approximately 100 mm (4") in depth

Non-destructive measurement of moisture conditions in concrete decks, measurement of moisture conditions in wood decks, and ambient relative humidity and dew point conditions.

1 x Hygro-i2@probe

Hand held electrode with 7" insulated pins

  • Features

    For non-destructive moisture evaluation of roofs, EIFS, foam insulation systems & other building envelope applications.

    Detects, locates and traces leaks in concrete flooring.

    To evaluate the extent of the moisture problem and help trace and pin-point its source.

    Multi-mode functions allowing for depth penetration and sensitivity selection.

    Fast and easy to operate giving instant clear readings.

    “Hold” function facilitates ease of recording readings.

    Lightweight, handheld and battery operated.

    Inexpensive to purchase and operate compared to other non-destructive testing methods.

    Features of CMEX II:

    Measures up to 6.9% Moisture Content in Concrete.

    Carbide Method (CM) equivalent scale for concrete and anhydrite.

    Hold function “freezes” meter reading when inspecting areas where the meter face is not visible.

    Attaches to a relative humidity Hygro-i2 ® probe for in situ testing of concrete and ambient conditions of relative humidity, temperature, dew point and mixing ratio, all shown simultaneously on one clear display.

    Attaches to Pin-type probe to give 7% to 24.9% Moisture Content measurement in wood and 7 - 100 WME readings in most other building materials.

  • Specification

    Size: 487mm x 380mm x 145mm (19.2" x 14.9" x 5.7")

    Weight: 4.51kg (9.9lbs)

    Power: 3 x 9 volt PP3

    Batteries (included)

    Measuring range - RWS:

    Depth of penetration: 100mm (4") approx.

    Reference scale: (NDT*) 0 to 100

    Measuring range CMEX II:

    Measures up to 6.9% moisture content in concrete.

    Non-destructive CM Carbide Method moisture content equivalent readings.

    Large clear backlit digital display.

    Hold function "freezes"meter reading when inspecting areas where the meter face is not visible, and for easy recording of data.

    7% to 24.9% Moisture Content measurement in Wood, 7 -100 WME, using Pin-type probe attachments. (optional)

    Attaches to a reusable relative humidity Hygro-i2 ® probe for in situ and hood testing of concrete per BS 8201, 8203, 5325 and ASTM F2170. (optional)

    Ambient conditions of relative humidity, temperature, dew point and grams per kilo, all shown simultaneously on one clear display. (using optional Hygro-i2 ® probe)