TRAMEX Moisture Meters & Kits

Building Survey Inspection EZ Kit

Building Survey Inspection EZ Kit

Kit contents 8 x Hole liners and caps.

Kit contents Heavy-duty pin-type wood hammer probe.

Kit contents Calibration Check Salts for RH probe.

The heavy-duty pin-probes measure moisture content in wood, and the insulated 200mm pins allow for deep wall cavity probing.

Moisture source is identified and stopped, remedial action can be taken leading to a healthier building environment.

  • Features

    Deep signal, non-destructive penetration up to 30mm in wood and drywall in non-destructive mode.

    Detects moisture through paint, wall coverings, drywall, ceramic tiles, floor coverings, wood, roof coverings and most building materials.

    Hold function “freezes” meter reading when inspecting areas where the meter face is not visible.

    Audio signal sounds when meter indicates high readings.

    Large clear backlit digital display giving meaningful readings.

    Accuracy in very low moisture content readings and up to 55% moisture content readings in wood in non-invasive mode.

    Attachable pin-type wood probe for accessing hard to reach areas and for probing into wall cavities and wood. (optional)

    Attachable Relative Humidity probe for testing of relative humidity, temperature, dew point and grains per pound readings all shown on one clear display, as well as in situ or hood testing of concrete per BS 8201, 8203, 5325 (optional)

  • Specification

    Size: 430mm x 345mm x 130mm (16.9" x 13.6" x 5.1")

    Weight: 3.72kg (8.2lbs)

    Power: 2 x 9 volt PP3 Batteries (included)

    Measuring range:

    Depth of penetration: up to 30mm (1 1/4") (in wood, drywall)

    Reference scale for building materials 0 to 100

    Relative Humidity (with optional RH probe) 0 to 99%

    Humidity accuracy: 0% to 99%RH +/- 2% @ 25°C / 77°F

    Wood Non-invasive Mode 5 to 55%MC (at SG of 0.3)

    Wood Invasive Mode (with optional wood pin probes) 7 to 40%MC