TRAMEX Moisture Meters & Kits

MRH 3 Moisture and Humidity Meter

MRH 3 Moisture and Humidity Meter - MRH3

Deep signal penetration up to 30 mm in wood & drywall in non destructive mode

HOLD function "freezes" meter reading when meter face is not visible

Audio signal sounds when meter indicates high readings

Accuracy in very low moisture content readings

  • Features

    Digital, non-destructive moisture meter.

    Deep signal penetration to over 25mm (1") into the materials being tested without the need to damage the surface. Signal penetration depends on material being tested and meter setting.

    Specific gravity adjustment for wood species.

    External Rubber electrodes make direct contact with the material being tested for best sensitivity and repeatability.

    Wide range of readings for wood of 5% to 30% and 0 to 100 comparative for all other materials.

    Backlit, large, clear, easy to read LCD display.

    "Hold" function enables user to "freeze" the reading. Useful for taking readings when the meter face is not visible.

    Switchable "On" or "Off" audio warning tone.

    Automatic power cutoff switches "Off" when not in use.

    Automatic default to last user setting when switched back on.

    Battery operated (included).

    Attaches to plug-in wood probe (optional).

    Attaches to plug-in Tramex Hygro-i2@ relative humidity probe for relative humidity, temperature, dew point and mixing ratio readings (optional).

  • Specification

    Size: 150mm x 85mm x 38mm (6" x 3.5" x 1.5")

    Weight: 240g (8.47oz)

    Construction: ABS

    Body Power: 9 volt PP3

    Battery (included)

    Display: Digital / Backlit Depth of penetration: up to 30mm(1¼")(In wood, drywall)

    Measuring range:

    Reference scale for building materials: 0 to 100

    Relative Humidity (with optional Hygro-i2 ® probe): 0 to 99%

    Wood Non-invasive Mode: 5 to 55% MC (at SG of 0.3)

    Wood Invasive Mode (with optional wood pin probes): 7 to 40%MC